Water Heater Specialists
Looking to replace your old storage heater?
Ariston Pro R Slim
Horizontal Model
Available Capacities: 30 / 40 / 56 / 80 / 100L
Anticorrosion Magnesium Anode
External Temperature Regulation Knob
High Efficiency Insulation
Enameled Steel Tank
4.8
211 Google Reviews
4.9
64 Facebook Reviews
Past Works
Before
After
Regent Heights Condo | 14 May 2020
Above Ceiling Storage Heater Replacement
Replacement of a storage heater at Regent Height Condominium unit. Existing Heater 80L Ariston TI 80H, Made In Italy. Due to suspected high electric bill, the owner has decided to change it to a smaller tank, 30L since there is no requirement for 80L.
- Downsized from 80L to 30L model
- All pipe works replaced with stainless steel from original copper
- Approved stop & double check valves employed in accordance with PUB
- PUB Licensed Plumber supervised installation
- Additional 1-year warranty on labor on top of Rheem warranty
Kovan Regency Condominium | 21 Jan 2020
Above Ceiling Storage Heater Replacement
Replacement of an Ariston Pro R Slim 56L. Due to the reduced need of such huge quantity of hot water, the owner has decided to cut the capacity to 30L.
- A Rheem EHG-30 has been selected
- Approved stop & double check valves employed in accordance with PUB
- PUB Licensed Plumber supervised installation
- Additional 1-year warranty on labor on top of Rheem warranty
Before
After
Before
After
Pasir Ris Dr 1 HDB | 15 May 2020
Exposed Storage Heater Replacement
Replacement of a storage heater at Parsir Ris Dr 1 HDB unit. Existing Heater is an Ariston TI-Shape 30 storage heater. Customer has selected the Rubine 30L for its longer warranty (5 years on heating element and 7 years on tank) and higher-powered heating element of 2,500W. The previous heater only has 1,500W.
- Stop valve, double check valve and a drainpipe connecting to the pressure relief valve are added to comply with the code
- PUB Licensed Plumber supervised installation
- Additional 1-year warranty on labor on top of Rubine warranty
Yishun St 11 HDB | 17 May 2020
Exposed Storage Heater Replacement
Replacement of an Ariston TI-Shape 15 to a latest Ariston Anris Lux 15.
- Added a drainpipe to the pressure relief valve
- Approved stop & double check valves employed in accordance with PUB
- PUB Licensed Plumber supervised installation
- Additional 1-year warranty on labor on top of Ariston warranty
Before
After
Before
After
Choa Chu Kang Ave 2 HDB | 22 May 2020
Exposed Storage Heater Replacement
Replacement of an old favourite Ariston TI-Shape 30, Made in Italy that has stopped working.
Owner selected the Rubine RWH-AR30 for its clean appearance and longer warranty of 5 years on heating element and 7 years on tank.
- All connecting pipeworks replaced with stainless steel from original copper.
- Added a drainpipe connecting to the pressure relief valve. A requirement overlooked by many
- Approved stop & double check valves employed in accordance with PUB
- PUB Licensed Plumber supervised installation
- Additional 1-year warranty on labor on top of Rheem warranty
F. A. Q.
Can a handyman replace my electric storage water heater?
No.
From 1 April 2018, only a PUB Licensed Plumber can carry out a storage heater replacement.
Do I need to buy the exact same heater model for a cheaper replacement cost?
No need.
Replacing with an exact same model does not result in lower replacement cost.
Many of the existing heater installations do not comply with the code especially the older ones.
Our Licensed Plumber would require to redo a new pipe layout, add safety devices and fittings to comply with the Code of Practice for Water Services SS636-2018 (formerly CP 48).
My current tank size is 57 litres in the master bathroom that has a bathtub. I don’t intend to use the bathtub anymore, should I choose a smaller tank size instead?
Yes.
For shower and basin use, choosing a 23 – 30 litres tank will be more than enough for a single bathroom.
How can I get a storage heater located above the false ceiling replaced when the access panel opening isn’t big enough?
There will be a need for an additional cut-out to the false ceiling usually about 900x1000mm and reinstate after having completed the replacement.
The ceiling shall look the same like before.
The heater has stopped heating up. I've read about replacing the heating element. How do I decide between replacing the heating element and the heater?
If the heater is under 5 years old, it may be feasible to replace the parts however no one is sure until an onsite assessment is made. Sometimes the thermostat may also require changing which may add up to half the cost of a new heater.
If the heater is older, the tank may have corroded badly that the heating element cannot be removed.
Will heater with stainless steel inner tank last longer than others?
Not necessarily.
Firstly, the brands that have models constructed of stainless steel does not provide a longer warranty
Having a stainless-steel inner tank:
- does not stop the heating element from failing
- does not stop the water leaking from the heating element screw thread causing short circuit
