Solahart Solar Water Heater Replacement

Old storage water heater:

Solahart Solar Water Heater

Since 1953, Solahart has led Australia’s solar industry with unmatched expertise and innovation.
Known for pioneering solar water heaters, we’ve expanded to offer a full spectrum of renewable energy solutions globally.
Our portfolio includes efficient solar power systems, battery storage, electric water heaters, heat pumps, EV chargers, and Home Energy Management Systems.
With over a million installations worldwide, Solahart remains at the forefront of sustainable technology, committed to advancing renewable energy solutions for homes and businesses.

New storage water heater:

EHG-80 Water Heater

This heater unit has met the following requirements for a water heater:

Work Scope:

1. Cut off the water pipes from the old solar water tank.
2. Terminate the hot and cold-water pipes from the old solar water tank.
3. Install the plywood floor above the false ceiling using steel rope to support the tank’s weight.
4. Supply of tank, pipe and fittings
5. Pipe works partial redo to comply with PUB regulations
6. New tank installation
7. Testing and commission.
8. Submission to PUB
9. Clean up before leaving
10. PUB approval letter

Regulatory Compliance:

The electric water heater as a whole unit (i.e. parts incorporated in the water heater itself such as heating element, pressure relief valve/temperature relief valve, water tank, etc. shall be tested in accordance with the following:

1. AS/NZS 4020:2018 Appendix K – Sample extraction procedure for use with water heating system.
   An accredited or non-accredited test report for Appendix K is acceptable provided that the test laboratory is accredited by Singapore Accreditation Council (SAC) to AS/NZS 4020:2018 Appendix H on Extraction of Metals, at the point of testing;
2. The samples extracted in accordance with Appendix K shall then be tested in accordance with AS/NZS 4020:2018 Appendix H – Extraction of metals (for metallic materials in contact with water).
   The maximum allowable concentrations of metals listed in Table 2 of AS/NZS 4020:2018 shall not exceed the limits specified by the World Health Organization (WHO) Guidelines for Drinking Water Quality.

Reason for the Replacement: End of service life

Our  licensed water service plumber has ensured that work is done in accordance with the conditions stated below:

1. All water service installations must be in accordance with the Public Utilities (Water Supply) Regulations, Singapore Standards 636 for Water Services, and all other relevant statutory requirements.
2. The proposed works shall not adversely affect the existing water supply reticulation system.
3. The proposed water storage heater is installed in accordance with the specifications and requirements of the manufacturer.
   The installation of double check valves is safe and effective in preventing backflow and the back-siphonage of water from the storage water heater through the heater inlet pipe and will be safe for use.

Conclusion:

In conclusion, the newly installed Rheem EHG-80 Water Heater is a top-quality and dependable product, fully compliant with regulatory standards.
We are delighted to inform you that we have received the PUB Approval Letter for this installation.
This approval not only confirms that the installation adheres to PUB regulations, ensuring safety and efficiency, but also officially documents the heater replacement.
The Rheem EHG-80’s advanced features promise enhanced performance and reliability for your household.

Read More About Us

Homeone Home Page

Shop

Portfolio

Services

Blogs

About Us

Contact Us

Our Water Heater Services

#Storage Water Heater

#Rheem

#Joven 

#Ariston

#Edward

#Solarhart

#Gas Heater

#Paloma

#Ferroli

#Rinnai

Follow our Social Media

#FaceBook

#YouTube