Water Heater 2.5mm2 wire

$250.00

Keystone Cable 2.5mm2 Wire / Cable – Low Voltage Cables

450/750V Single-Core, PVC Insulated, Non-Sheathed Cable

To install, repair or replacement a 6 meters of 2.5mm2 wire/ cable for water heater
EMA authorised licensed electrical work to replace, repair & install to ensure safety.

Specifications

SS 358-3, IEC 60227-3, IEC 60332-1-2

Application

This cable is used in light fitting, and in switching and control equipment. It can be installed on cable trays, in conduit, and cable trunking.

Voltage Rating

450/750V

Insulation Colour

Brown, Black, Grey, Blue, Green/Yellow

Operating Temperature

70˚C
Order via Whatsapp
Categories
Share

Why Need Water Heater 2.5mm2 wire?

  1. Water Heater Manufacturer Installation Manual regulate must use water heater 2.5mm2 wire to ensure safety and prevent fire hazard.
  2. Singapore Standard SS636:2018 – Code of Practice for Water Services Clause 6.5.2(g) indicate that all the installation spec must comply with manufacturer.
  3. Singapore Standard SS638:2018 – Code of Practice for Electrical Installations indicate water heater 2.5mm2 wire current rating (433.1 Cor-ordination between conductor and overload protective device)

 

What kind of wire/cable is approved for use in Singapore?

  1. All wire specifications must comply with SS638:2018, which is reproduced from the BS7671:2018 Wiring Regulations.
  2. Wires without proper specifications are not allowed, and their installation in Singapore for any appliances is a violation.
  3. The wire specifications 3C x 70/0.0076 or 3C x 110/0.0076 have had their approvals withdrawn and are no longer allowed for installation in Singapore for any appliances.

Terms and Conditions

Reviews

There are no reviews yet.

Be the first to review “Water Heater 2.5mm2 wire”

Your email address will not be published. Required fields are marked *

Got A Question?

Feel free to reach out to us, if you have any enquiries